HDA4745功能介紹-HYDAC傳感器
HDA4745功能介紹-HYDAC傳感器，HYDAC賀德克壓力傳感器：HYDAC電子壓力傳感器用于流體技術系統記錄的壓力。功能和執行的形式通過各自的使用條件來確定。為了滿足這些要求，賀德克提 供從微型壓力傳感器到特定客戶的多重壓力開關的綜合方案。電子壓力傳感器，記錄測得的壓力變化，并將其轉換為成比例的輸出信號。電子壓力開關記錄該測得的 壓力可變，對它進行處理，并輸出按照預置的切換信號。
賀德克HYDAC壓力變送器HDA 4700 中文描述
可用的版本：標準; CANopen總線; ATEX認證; CSA ; IECEx認證;Schiff & Offshore;與恒指傳感器檢測;與前面齊平膜片;與增加功能性安全應用
HYDAC壓力傳感器系列HDA 4700配備了薄膜的DMS不銹鋼膜片非常和強大的傳感器單元。4 ... 20 mA或0 ... 10V輸出信號可連接到賀德克電子有限公司的所有測量和控制裝置和聯動市售評估系統（如PLC控制） 。用于數據傳輸?shù)哪康模?EVS 4748 -H配備有HSI接口（德克傳感器接口）。
賀德克HYDAC壓力變送器HDA 4700 英文描述
Available versions: Standard; CANopen; ATEX; CSA; IECEx; Schiff & Offshore; with HSI sensor detection; with front-flush diaphragm; for applications with increased functional security
The pressure transducer series HDA 4700 is equipped with a very accurate and robust sensor cell with a thin-film DMS on a stainless steel diaphragm. The 4 ... 20 mA or 0 ... 10V output signals enable connection to all measurement and control devices of HYDAC ELECTRONIC GmbH and linkage to commercially available evaluation systems (e.g. PLC controls). The variant with HSI sensor detection was specially developed for use in conjunction with the HYDAC measurement devices HMG 500, HMG 510, HMG 3000 and CMU 1000. For data transmission purposes, the EVS 4748-H is equipped with an HSI interface (HYDAC Sensor Interface). Thanks to this, the HSI sensor is recognised compley automatically by the HYDAC measurement devices listed above and all necessary basic device settings are then immediay undertaken automatically. The variant with the front-flush HDA4745功能介紹-HYDAC傳感器
diaphragm was specially developed for applications in which the media used could lead to a blockage, gumming-up or freezing of a standard pressure connection. The variant for applications with enhanced functional safety was specially developed for use in safety circuits / safety functions in the context of the functional safety of machines and plants up to PL d – Cat 3 (in accordance with ISO 13849). In addition, utilisation in an SIL 2 - system (in accordance with EN 61508) is also possible. The pressure transducers are designed with two channels. Each channel consists of one sensor element and one evaluation electronics. Because of this, the pressure transducer generates two separate pressure-proportional output signals which are independent of one another. The main areas of application are in the or industrial area of hydraulics and pneumatics, particularly in applications with constricted cavity and as sensor elements in , safety-oriented systems such as load torque display or load torque limitation in loading cranes or work platforms. Additional fields of application can be found in processes with changing media, in which residues could lead to mixing or contamination of the media.
Accuracy ±0.25% FS type.
Measurement ranges: between 0 ... 6 bar and 0 ... 600 / 1000 bar, depending on the type
Output signals: 4 ... 20 mA, 0 ... 10V, CANopen
Very robust sensor cell
Very small temperature error
Excellent EMC characteristics
Very compact design
Convincing price/benefit ratio
Optional with front-flush diaphragm
Also available with ATEX, CSA, IECEx or Schiffs approval
HDA4745功能介紹-HYDAC傳感器
員_a.png)